If you're used to playing music and other audio files with the popular program, Winamp then you may want to broadcast right from this program. This may be the easiest way for you to get up and broadcasting right away with virtually no learning curve for people who are already used to this program. Following these simple steps will configure your winamp to not just play music locally, but broadcast it out over your shoutcast server to anyone through the internet.
A leaked version of Winamp 5.8 recently spread over the Internet. Consequently, we have decided to make this new version available to you, revised by us. We therefore recommend that you download this version rather than any other as we guarantee it is safe for you to use. Encoder Settings (select streaming audio format). Select the 'Encoder' tab at the top of your DSP window. Make sure under the selection box, you have selected 'Encoder 1'. The Encoder Type can be set to either MP3 or AAC+, our servers support both. Click on the ‘Encoder’ subtab and set the encoder to ‘MP3’ and the bitrate to 128kbps. (If your account allows you can set a higher bitrate if you like) Now click on ‘Connect’ Congratulations! You are now broadcasting live from Winamp. To add some music into Winamp return to the main Winamp window. Click the small + icon in the.
1) Download and Install Edcast for Winamp
Go to your Control Panel and choose the Downloads tab, Download and Install Edcast for Winamp.
Go to your Control Panel and choose the Downloads tab, Download and Install Edcast for Winamp.
2) Follow the simple step by step instructions which are on your screen. When you reach the 'components to install' page, it is critical that you have the box labeled 'LAME encoder dll(for MP3 encoding) checked. This will allow you to play your MP3s through the Standalone App. *MP3's are one of the most common audio file formats.
3) Download the MP3 Lame Encoder
Near the end of the installation process you will get a message box telling you that you need to download a file called, “Lame_enc.dll” into the program directory (normally C:program fileswinamp). Choose YES. You can also perform this step manually by downloading the file from your control panel and placing it in your program directory if you wish.
Near the end of the installation process you will get a message box telling you that you need to download a file called, “Lame_enc.dll” into the program directory (normally C:program fileswinamp). Choose YES. You can also perform this step manually by downloading the file from your control panel and placing it in your program directory if you wish.
4) Place the lame encoder dll (lame_enc.dll) in the Winamp program directory.
Once you've completed the installation process you'll be ready to prepare your station for live broadcasting. Following these quick steps will have you broadcasting in just minutes.
5) Go to your Caster.FM control panel and log in securely.
![Winamp Encoder Winamp Encoder](/uploads/1/3/7/4/137473822/640060607.jpg)
6) Click the button labeled “Start Server”
This will initialize your server and display a page which looks like this:
This is the information you'll need about your server to connect it to the Edcast plugin for Winamp.
This is the information you'll need about your server to connect it to the Edcast plugin for Winamp.
Your server is now running, but before you can broadcast you need to configure WinAmp by performing the following steps:
7) Launch Winamp
Once it is open go to options>preferences or press CTRL+P. At the preferences window choose “DSPEffect” and then click on the “edcast DSP v3 [dsp_edcast.dll] option.
Once it is open go to options>preferences or press CTRL+P. At the preferences window choose “DSPEffect” and then click on the “edcast DSP v3 [dsp_edcast.dll] option.
Backblaze youtube. Backblaze is a pioneer in robust, scalable low cost cloud backup and storage services. Personal online backup to enterprise scale data storage solutions. Seamless Integration Provides:. Fast, local shared storage integrated with enterprise-grade, readily accessible cloud storage. Sync tools to enable remote user workflows and speed collaboration across multiple locations. A complete, cost-effective 3-2-1 backup protection solution. Get Started - 10 GB Free. Unlike Backblaze, IDrive gives you a great deal of control over your backup process, letting. Never lose a photo, video, or file again. Cloud backup made easy and automatic. Backblaze unlimited online backup for $6 per month.
Terminus solutions reviews. 8) Configure Edcast Plugin . Locate and click on the “Add Encoder” button.
8) Right click on the new encoder which is created and choose 'configure'
This is one of the most important steps as it is where you are configuring your broadcasting settings. While these settings can be changed quickly and easily down the road, it is best to take your time and choose the right options now.
9) Fill in the settings as follows:
• Encoder Type: MP3 Lame
• Bitrate: 128 Kbps or 64 Kbps
• Samplerate: 44000. This is the standard setting for most users.
• Channels: 2 – 1 channel is for a mono broadcast, 2 is for stereo.
• Server Type: Icecast2
• Server IP: Enter the Server IP from your caster.fm dashboard
• Server Port: Enter the Server Port from your caster.fm dashboard
• Encoder Password: Enter the Encoder password from your caster.fm dashboard
• Mount Point: /listen.mp3
• Reconnect: 10 – This is an optional setting which will allow the Edcast Application to reconnection if it is disrupted.
• Encoder Type: MP3 Lame
• Bitrate: 128 Kbps or 64 Kbps
• Samplerate: 44000. This is the standard setting for most users.
• Channels: 2 – 1 channel is for a mono broadcast, 2 is for stereo.
• Server Type: Icecast2
• Server IP: Enter the Server IP from your caster.fm dashboard
• Server Port: Enter the Server Port from your caster.fm dashboard
• Encoder Password: Enter the Encoder password from your caster.fm dashboard
• Mount Point: /listen.mp3
• Reconnect: 10 – This is an optional setting which will allow the Edcast Application to reconnection if it is disrupted.
10) Once you hit OK your settings are saved and you're ready to start broadcasting live!
simply click connect and you're ready to go!
Anything you play in WinAmp will now be broadcast through the internet to your listeners.
simply click connect and you're ready to go!
Anything you play in WinAmp will now be broadcast through the internet to your listeners.
Important Note
If your computer has more than one sound card you need to select the desired sound card and output. The Edcast streams from only the sound card and output you select. In most computers the 'stereo mix' is the correct option to choose.
If your computer has more than one sound card you need to select the desired sound card and output. The Edcast streams from only the sound card and output you select. In most computers the 'stereo mix' is the correct option to choose.
Step 1 - Install Winamp
Download and install Winamp (if you don’t already have it installed). Winamp is a free download.
Step 2 - Install the Edcast DSP Plugin and lame_enc.dll
Download the Edcast Plugin for Winamp and install it. This is a free plugin for Winamp that lets you stream out to the Internet.
Download the LAME MP3 encoding plugin (lame_enc.dll) and place it into your Winamp folder. Do this by right clicking the link and choosing “Save Link As…”, then navigate into ‘C: Program Files (x86) Winamp’ before clicking the Save button.
Step 3 - Start Winamp and the Edcast DSP Plugin
- Start Winamp
- Press Ctrl - P (Ctrl and P keys together) - This will open the settings page.
- (1) Click ‘DSP/Effect’ on the left column - you may need to scroll down.
- (2) Select ‘edcast DSP v3’ - a window called ‘edcast’ will appear.
Step 4 - Set up the encoder
- (3) Click the ‘Add Encoder’ button
- (4) Right-click the new encoder that appears below it
- (5) Choose ‘Configure’ from the menu that appears
In the ‘Basic Settings’ section, set up the encoder.
- (6) Enter your chosen bitrate - this must be equal or lower than the rate you purchased.
- (7) Enter your samplerate - Enter 44100 for bitrates above 96, or 22050 for streams below 96.
- (8) Number of channels - Enter 2 for bitrates above 48, choose 1 for bitrates below 48.
- (9) Select the ‘MP3 Lame’ encoder
- (10) Select ‘Icecast2’ for Icecast server, or ‘Shoutcast’ for Shoutcast server.
- (11) Enter the host name of your server.
- (12) Enter the port number of your server.
- (13) Enter the DJ or Admin password of your server.
- (14) (Icecast2 only) Enter the mount point - this will usually be /stream by default for Fast Serv Icecast2 servers.
- In the ‘YP Settings’ section, enter your station details.
- Click ‘OK’
Step 5 - Start encoding
- (15) Tick the ‘AutoReconnect’ box
- (16) Hilite the new encoder, then click the ‘Connect’ button
- You should see information about the encoder status in the ‘Transfer Rate’ column. If it’s working properly, a numeric value will appear indicating the transmission speed.
Winamp Encoder Crack
Notes
- If you are unable to connect, go back to step 4 and double check every server setting. You must also make sure there is music playing in Winamp.
- You can also stream audio directly from your sound card input (or other audio device on your PC). Click the box with an ‘X’ in it under ‘Live Recording’. You can then select the audio device you wish to capture audio from.
Winamp Encoder Windows 10
You’re now streaming live on the Internet!
Winamp Encoder Mp3
Share the Love
Winamp Mp3 Encoder Plugin Download
Back to Streaming Media